Breathe Easy With TandusTape

With no wet adhesives, no heavy buckets of glue, no messy clean up, and no odors we all breathe a little easier. Whether you need a permanent or temporary installation, breathe easy with TandusTape.

Download TandusTape Literature

  • TandusTape

    TandusTape

    TandusTape is for use on Tandus’s ethos modular carpet. TandusTape can be installed at MVER ≤ 8.0 pounds, PH < 11.0 and In-Situ/RH ≤ 85%. It’s odor free, has low VOC’s and results in a faster installation.

    More

    • Supplied in self wound perforated rolls with an outer diameter of 5 inches on a 3 inch inner diameter

    • Each tape unit measures 3 inch by 4 inch +/- 0.125 inch with notched perforations between each unit.

    • There are 324 units per roll with a coverage area of 144 square yds/roll installed with 24 inch tile.

    • Packaged from 1 to 16 rolls per box with a minimum order quantity of 1 roll.

    • The tape unit is centered at the corner of the tile as to engage the inner section of the two adjacent and one opposing tile corners

  • TandusTape+

    TandusTape+

    TandusTape+ is for use on Tandus’s ethos modular carpet. TandusTape+ can be installed at MVER ≤ 12.0 pounds, PH < 11.0 and In-Situ/RH ≤ 95%. It’s odor free, has low VOC’s and results in a faster installation.

    More

    • Supplied in self wound perforated rolls with an outer diameter of 5 inches on a 3 inch inner diameter

    • Each tape unit measures 3 inch by 4 inch +/- 0.125 inch with notched perforations between each unit.

    • There are 324 units per roll with a coverage area of 144 square yds/roll installed with 24 inch tile.

    • Packaged from 1 to 16 rolls per box with a minimum order quantity of 1 roll.

    • The tape unit is centered at the corner of the tile as to engage the inner section of the two adjacent and one opposing tile corners

  • Installation

    Installation

    Installation is very simple and free of any excessive waste. Self wound rolls have no release liner to dispose of, nor the typical waste associated with the use of bucket adhesives.

    More
    Installation

    One piece is applied to one corner of each successive modular tile. The resulting installation is a floating floor that stabilizes itself through interactive forces generated through the attachment of adjacent tile, while exponentially building as the floor coverage increases. Installation

    Above: 24” x 24” random, monolithic, and quarter turn modular installations. To view all installation diagrams, Download TandusTape Literature

  • Moisture

    Moisture

    Floor moisture issues have become more frequent and difficult to identify.  All floor covering manufacturers and adhesive companies require floor Moisture Vapor Emission Rate (MVER) testing, pH testing and Relative Humidity testing prior to flooring installations.

    More

    • MVER Testing (ASTM F-1869-10)

    • RH Testing (ASTM F-2170 -10)

    • pH Testing (ASTM F-710-10)

    A minimum of one test per 1,000 square feet of flooring space is required. Always check the manufacturer's recommendations and warranties prior to installation.